Categories
Contact Us

Add: NO. 1 Road, Wenling Industrial Zone, Wenling City, Zhejiang, China

Contact: Owen Feng (Sales Director)

Mobile: +86-139 6867 8670

Tel.: +86-576-8995 9870  +86-576-8997 5950

Fax: +86-576-8995 9370

E-mail: sales@kangbond.com

              kangbond@163.com

Service Hotline
+86-576-89959870+86-139 6867 8670

News

Home > NewsContent

Introduction To Classification Of Industrial Panel

    Stainless steel plate Industrial board surface is bright and clean, have high plasticity, toughness and mechanical strength, acid, alkaline gas, solution and other medium corrosion. It is not easy to rust the alloy steel, but not absolutely not rust. Stainless steel plate refers to the atmosphere, steam and water, such as weak medium corrosion of steel plate, and acid-resistant steel plate refers to acid, alkali, salt and other chemical etching medium corrosion of the steel plate. The stainless steel plate has been in existence for more than 1 centuries since its inception in early 20th century.
    Industrial cardboard, as the name suggests industrial cardboard, its classification is probably several categories. A class of corrugated cardboard or become honeycomb paperboard, its main raw material for recycling cartons, a relatively environmental protection of a cardboard, but also the thickness can be low; The main application in the box,Industrial Panel
    Packaging or gaskets for large equipment. However, the hardness and bursting resistance of this kind of paperboard are relatively low, but its use is wide, recovery speed is faster. Although it is low in cardboard, the amount of this cardboard is the largest. A type of hot-pressed cardboard, or a pressure plate, it is more complex in production and manufacturing process, because of its resistance to pressure, resistance to distortion, breaking and tensile strength is better; but there is a drawback is that grams is too high, in the case of raw materials as a packaging box, not open groove and indentation. This kind of cardboard is mainly used in electrical insulation or packaging and other fields.Industrial Panel
    The stainless steel plate is divided into two kinds of hot and cold rolling, including the thickness of 0.02-4 mm thin plate and the 4.5-50 mm medium plate. According to the organizational characteristics of steel grades are divided into 5 categories: austenitic body, austenite-ferritic body, ferrite body, martensite, precipitation hardening type. The request can withstand oxalic acid, sulfuric acid-ferric sulfate, nitric acid, nitric acid-hydrofluoric acid, sulfuric acid-copper sulfate, phosphoric acid, formic acid, acetic acids and other corrosion, widely used in chemical industry, food, medicine, papermaking, Petroleum, atomic energy and other industries, as well as construction, kitchenware, tableware, vehicles In order to ensure that all kinds of stainless steel plate yield strength, tensile strength, elongation and hardness and other mechanical properties meet the requirements, steel plate before delivery must undergo annealing, solid solution treatment, aging treatment and other heat treatment. Corrosion resistance of stainless steel mainly depends on its alloy composition (chromium, nickel, titanium, silicon, aluminum, manganese, etc.) and the internal structure of the main role is chromium. Chromium has a high chemical stability, can form a passivation film on the steel surface, so that the metal is isolated from the outside world, the protection of steel plate is not oxidized, increase the corrosion resistance of steel plate. The corrosion resistance of the passivation film is reduced.Industrial Panel