Contact Us

Add: NO. 1 Road, Wenling Industrial Zone, Wenling City, Zhejiang, China

Contact: Owen Feng (Sales Director)

Mobile: +86-139 6867 8670

Tel.: +86-576-8995 9870  +86-576-8997 5950

Fax: +86-576-8995 9370



Service Hotline
+86-576-89959870+86-139 6867 8670


Home > NewsContent

Processing Technology Of Metal Composite Panel

                At home and abroad, the production methods of composite sheet materials include solid-liquid combination method and solid-interphase bonding method. The most common solid-interphase bonding method is explosive welding and explosive welding billet + rolling, in addition to laminated plate hot rolling method, diffusion crimping method, surfacing method, surfacing welding and hot rolling method. Explosive welding production of composite plate is the use of explosives for the energy medium to weld metal, by using the shock wave generated by the explosion to move the complex plate to the base plate movement, in the discharge gap of the gas at the same time through impact, in the contact interface occurs a thin layer of metal plastic deformation, melting and diffusion between atoms, so that the metal plate welding. "Explosive welding billet + rolling" is the process method of rolling on the basis of explosive welding, mainly for the development of cold-rolled double-sided composite plates and coils. Through different production methods, composite plate composite has one-sided composite, there are two-sided composite, shape plate, tube, wire, rod, wire, conductive composite materials.Metal Composite Panel

                The main steel plate of stainless steel is mainly produced by explosive welding in our country. The bonding interface of explosive welding is a waveform, which is different from the interface of direct rolling, and whether the waveform interface is considered as an important sign of good bonding. According to the metallographic observation of the specimen, there are three types of explosive composite interface: one is the direct bonding between metals, the other is the formation of the interface wave-like bonding, and the third is the formation of a homogeneous continuous melting layer between metals. In these three forms, only the formation of wave-like bonding, the atom diffusion between the interface can make the composite plate have a higher interfacial strength, but also can achieve in the wider process parameters range of processing, is the ideal combination.Metal Composite Panel

               Tisco used "Explosive welding billet + rolling" method, the bulk of the final composite plate thickness (0.07+0.7+0. $number) mm thin specifications cold-rolled double-sided composite roll trial mainly used in building doors and windows and other decorative industries.Metal Composite Panel